Skip to content 
The Worster boilers are one of the most reliable heating systems available, but sometimes they require a proper reset. However, this may be due to a power cut, low pressure, or performance error code. Moreover, resetting the boiler is often the fastest way to heat and restore hot water to your home.
In this guide, we will explain how to reset the Worcester boiler, to prevent general problems. Moreover, we’ll determine when professional help is required.
Why You May Need to Reset Your Worcester Boiler?
Your Worcester boiler may require reset for various reasons. However, it includes:
- Power cuts: Suddenly, power failure can disturb the boiler function and require a reset to restore normal operation.
- Low water pressure: So, if the pressure falls below the recommended level, the boiler may be closed due to safety reasons.
- Error or Error Code: Moreover, the boiler will display an error code when the problem is detected. Some of these errors can be cleaned with a reset.
- Gas supply problems: If the gas supply is hindered, the need for a boiler reset cannot be able to ignite.
- Overheating: If the system overheats, the boiler will automatically be closed to prevent damage.
However, if the boiler stops working, reset is the first step to bring it back and run.
How to Reset a Worcester Boiler?
Resetting the Worcester boiler is a direct process. Moreover, follow these steps carefully:
1. Find the Reset Button
- The reset button usually occurs on the panel on the boiler.
- In the Worcester Greenstar model as 30si and 4000, the button is marked as ‘reset’.
- Moreover, if you are unsure of the location, you can look at the user manual.
2. Press and Hold the Reset Button
- Press the reset button well for 3-5 seconds.
- Drop and wait while the kettle is trying to restart.
- You can hear a clicking sound, which is normal.
3. Wait for the Boiler to Restart
- The screen should empty any previous error code.
- The boiler should be ignited automatically.
- However, if the reset is successful, heating and hot water should restart the normal operation.
Common Worcester Boiler Error Codes and Their Meaning
| Error Code | Meaning |
|---|---|
| EA | No flame detected (possible gas supply issue) |
| F1 | Low pressure (requires re-pressurization) |
| E9 | Overheating detected (check for blocked pipes) |
What to Do If Your Worcester Boiler Reset Does Not Work
If resetting the boiler does not solve the problem, check the following:
1. Check the Boiler Pressure
- The low pressure can prevent the boiler from working properly.
- Find the pressure gauge in front of the boiler.
- The ideal pressure level is between 1 and 1.5 times.
However, if the pressure is very low, follow these steps to press the boiler again:
- Turn off the boiler.
- Find the filling loop (usually a silver hose under the boiler).
- Open the valve gently to allow water to enter.
- When the pressure reaches 1.5 times, close the valve.
- Turn on the boiler back and reset it.
2. Check the Gas Supply
| Issue | Solution |
|---|---|
| Gas not working in home | Contact your gas provider |
| Gas supply valve closed | Open the gas supply valve |
| Boiler not igniting | Reset and check error codes |
- Ensure that your home’s gas supply is turned on.
- Check if other gas appliances are working.
- However, if there is no gas supply, contact your gas provider for assistance.
3. Look for Error Codes
- Worcester boilers display fault codes that indicate specific issues.
- Moreover, refer to the user manual to diagnose the issue and determine if professional help is needed.
4. Turn the Boiler Off and On Again
- Sometimes, a full power cycle can resolve the issue.
- Switch off the boiler at the main power switch and wait 5 minutes.
- Moreover, turn the boiler back on and attempt to reset it again.
5. Check for Frozen Condensate Pipes
- During winter, the external condensate pipe can freeze, causing the boiler to shut down.
- Signs of a frozen pipe include gurgling noises or an EA fault code.
So, to fix this:
- Locate the condensate pipe (usually a white pipe leading outside).
- Pour warm (not boiling) water over the pipe to thaw the ice.
- Reset the boiler and check if it works.
How to Reset a Worcester Boiler Without a Reset Button
Some Worcester models do not have a visible reset button. However, if you cannot find one:
- Turn the boiler off at the main power switch.
- Wait for at least 5 minutes.
- Turn the power back on.
- Check if the boiler restarts automatically.
- However, if the issue persists, check for error codes or low pressure before calling an engineer.
When to Call a Professional
If your Worcester boiler still does not work after resetting, it may need professional attention. Contact a Gas Safe registered engineer if:
- The boiler keeps shutting down after a reset.
- A fault code remains on the display despite resetting.
- The pressure remains too low after refilling.
- You detect a gas smell or water leak.
- Moreover, the boiler makes unusual noises like banging or whistling.
However, ignoring persistent issues can lead to costly repairs, so it’s best to address them early.
Conclusion
Resetting the Worcester boiler is usually a simple process. However, it’s far vital to test the underlying problems if the reset does not paint. By checking pressure, gas supply, and error code, you could regularly become aware of the hassle.
Moreover, if the boiler continues to paint, calling a professional engineer is the most secure option. Living with normal preservation can help save you from destiny breakdowns and ensure effective overall performance throughout the year.
Frequently Asked Questions
Press the reset button for 3-5 seconds until the boiler tries to restart.
Find the reset button, press and press it for a few seconds, and then wait for the kettle to restart.
If the pressure is very low, use the filling loop to add water to the meter reads 1-1.5 times. Then reset the boiler.
